Infra Insert 08: Difference between revisions

Latest revision as of 22:21, 1 February 2024

Welcome to Armbian 23.11.1 Jammy with Linux 6.1.50-current-bcm2711

System load:   6%           	
Up time:       1 day 2:52	
Local users:   2            	
Memory usage:  19% of 3.53G  	
IP:	           172.31.6.198 10.10.12.4
CPU temp:      36°C           	
Usage of /:    32% of 29G    	
storage/:      53% of 58G    	
RX today:      179.6 MiB  
Date:          01-02-2024

@@ Line 1: / Line 1: @@
 <!------------------------>
 <!-- do not remove this -->
-<div id="infra##" class="infra-insert">
+<div id="Infra Insert 08" class="infra-insert">
 <!------------------------>
-'''Wiki4print Raspberry Pi system snapshot 01.02.2024'''
-''[the day before this publication went to print]''
 <pre>
 Welcome to Armbian 23.11.1 Jammy with Linux 6.1.50-current-bcm2711
-System load:   6%           	Up time:       1 day 2:52	Local users:   2
+System load:   6%
-Memory usage:  19% of 3.53G  	IP:	       172.31.6.198 10.10.12.4
+Up time:       1 day 2:52
-CPU temp:      36°C           	Usage of /:    32% of 29G
+Local users:   2
+Memory usage:  19% of 3.53G
+IP:	           172.31.6.198 10.10.12.4
+CPU temp:      36°C
+Usage of /:    32% of 29G
 storage/:      53% of 58G
 RX today:      179.6 MiB
+Date:          01-02-2024
 </pre>
-NOTE ON IP:
-* 172.31.6.198 is the IP address that the Pi was accessible on at HKW Berlin Germany
-* 10.10.12.4 is the local IP address assigned to the Pi in the Servpub VPN network
-NOTE on storage amount 58G:
-* We have two drives, the 32GB SD card & usb thumb drive for backing-up the wiki4print content
 <!------------------------>