(Created page with "<!------------------------> <!-- do not remove this --> <div id="infra##" class="infra-insert"> <!------------------------> '''Wiki4print Raspberry Pi system snapshot 01.02.2024''' ''[the day before this publication went to print]'' <pre> Welcome to Armbian 23.11.1 Jammy with Linux 6.1.50-current-bcm2711 System load: 6% Up time: 1 day 2:52 Local users: 2 Memory usage: 19% of 3.53G IP: 172.31.6.198 10.10.12.4 CPU temp:...") |
No edit summary |
||
| Line 10: | Line 10: | ||
Welcome to Armbian 23.11.1 Jammy with Linux 6.1.50-current-bcm2711 | Welcome to Armbian 23.11.1 Jammy with Linux 6.1.50-current-bcm2711 | ||
System load: 6% Up time: 1 day 2:52 Local users: 2 | System load: 6% | ||
Memory usage: 19% of 3.53G IP: 172.31.6.198 10.10.12.4 | Up time: 1 day 2:52 | ||
CPU temp: 36°C Usage of /: 32% of 29G | Local users: 2 | ||
Memory usage: 19% of 3.53G | |||
IP: 172.31.6.198 10.10.12.4 | |||
CPU temp: 36°C | |||
Usage of /: 32% of 29G | |||
storage/: 53% of 58G | storage/: 53% of 58G | ||
RX today: 179.6 MiB | RX today: 179.6 MiB | ||
Revision as of 14:05, 1 February 2024
Wiki4print Raspberry Pi system snapshot 01.02.2024 [the day before this publication went to print]
Welcome to Armbian 23.11.1 Jammy with Linux 6.1.50-current-bcm2711 System load: 6% Up time: 1 day 2:52 Local users: 2 Memory usage: 19% of 3.53G IP: 172.31.6.198 10.10.12.4 CPU temp: 36°C Usage of /: 32% of 29G storage/: 53% of 58G RX today: 179.6 MiB
NOTE ON IP:
- 172.31.6.198 is the IP address that the Pi was accessible on at HKW Berlin Germany
- 10.10.12.4 is the local IP address assigned to the Pi in the Servpub VPN network
NOTE on storage amount 58G:
- We have two drives, the 32GB SD card & usb thumb drive for backing-up the wiki4print content