Infra Insert 08

This page was last edited on 1 February 2024, at 14:04.
Revision as of 14:04, 1 February 2024 by In-grid (talk | contribs) (Created page with "<!------------------------> <!-- do not remove this --> <div id="infra##" class="infra-insert"> <!------------------------> '''Wiki4print Raspberry Pi system snapshot 01.02.2024''' ''[the day before this publication went to print]'' <pre> Welcome to Armbian 23.11.1 Jammy with Linux 6.1.50-current-bcm2711 System load: 6% Up time: 1 day 2:52 Local users: 2 Memory usage: 19% of 3.53G IP: 172.31.6.198 10.10.12.4 CPU temp:...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Wiki4print Raspberry Pi system snapshot 01.02.2024 [the day before this publication went to print] 

Welcome to Armbian 23.11.1 Jammy with Linux 6.1.50-current-bcm2711

System load:   6%           	Up time:       1 day 2:52	Local users:   2            	
Memory usage:  19% of 3.53G  	IP:	       172.31.6.198 10.10.12.4
CPU temp:      36°C           	Usage of /:    32% of 29G    	
storage/:      53% of 58G    	
RX today:      179.6 MiB

NOTE ON IP:

  • 172.31.6.198 is the IP address that the Pi was accessible on at HKW Berlin Germany
  • 10.10.12.4 is the local IP address assigned to the Pi in the Servpub VPN network

NOTE on storage amount 58G:

  • We have two drives, the 32GB SD card & usb thumb drive for backing-up the wiki4print content


Retrieved from "http://10.10.12.4/index.php?title=Infra_Insert_08&oldid=1665"